usage:
masscan -p80,8000-8100 10.0.0.0/8 --rate=10000
 scan some web ports on 10.x.x.x at 10kpps
masscan --nmap
 list those options that are compatible with nmap
masscan -p80 10.0.0.0/8 --banners -oB <filename>
 save results of scan in binary format to <filename>
masscan --open --banners --readscan <filename> -oX <savefile>
 read binary scan results in <filename> and save them as xml in <savefile>
dan in ~/hackthebox/lame λ masscan --help
MASSCAN is a fast port scanner. The primary input parameters are the
IP addresses/ranges you want to scan, and the port numbers. An example
is the following, which scans the 10.x.x.x network for web servers:
 masscan 10.0.0.0/8 -p80
The program auto-detects network interface/adapter settings. If this
fails, you'll have to set these manually. The following is an
example of all the parameters that are needed:
 --adapter-ip 192.168.10.123
 --adapter-mac 00-11-22-33-44-55
 --router-mac 66-55-44-33-22-11
Parameters can be set either via the command-line or config-file. The
names are the same for both. Thus, the above adapter settings would
appear as follows in a configuration file:
 adapter-ip = 192.168.10.123
 adapter-mac = 00-11-22-33-44-55
 router-mac = 66-55-44-33-22-11
All single-dash parameters have a spelled out double-dash equivalent,
so '-p80' is the same as '--ports 80' (or 'ports = 80' in config file).
To use the config file, type:
 masscan -c <filename>
To generate a config-file from the current settings, use the --echo
option. This stops the program from actually running, and just echoes
the current configuration instead. This is a useful way to generate
your first config file, or see a list of parameters you didn't know
about. I suggest you try it now:
 masscan -p1234 --echo